Veta 6.0.147 Released
Numerous fixes. Of particular note, some projects will require reprocessing and the data length in thermal profiling coverage will likely be different if a project was not using meters.
Data Import
- Fixed: Compaction mode was sometimes read incorrectly for TDS files. Existing projects with these files will be reprocessed when opened.
Map
- Fixed: Rare crash when using the selection box to zoom to an area.
- Fixed: Scale was always shown in meters or kilometers.
- Fixed: Ruler distances were incorrect when using the coordinate system, “Other”.
Legends
- Fixed: Removing all legend items caused a crash.
Filters
- Fixed: Setting the source for a location filter to use an alignment file after changes had already been made to the filter could cause it to become corrupt. For existing projects, changing a value on the location filter back and forth may correct the filter. Such as changing an offset from 12 feet to 11 and back to 12. Otherwise, the operation filter will need to be recreated.
- Fixed: Possible fix for crash when closing the filter group manager.
- Fixed: Adding data from a new machine type to a project with existing operation filters did not set the defaults for some of the filters.
- Change: If a project contains multiple machine types, applying the filter group will succeed if any of the machine types is successfully filtered. Previously, all machine types were required to be successfully filtered.
Analysis
- Fixed: The data length for thermal profiling coverage was wrong when not using meters.
- Change: If a project contains multiple machine types, the analysis will succeed if any of the machine types is successfully analyzed. Previously, all machine types were required to be successfully analyzed.
Legends
- Fixed: Removing all legend items caused a crash.
Miscellaneous
- Fixed: The progress window may never close after being minimized.
- Fixed: The Project-Legends window had an incorrect title.
